Sport surfaces made out of acrylic are very durable and are easy to maintain. Only a little cleaning can go a long way in ensuring that the surface stays in good condition. The following are some of the simple tips for tennis court maintenance that will help to save a lot of money and extent the period of time between resurfacing cycles.
One of the easiest ways to maintain your facility is making sure you clean it on a regular basis. You should also look at any signs of mildew or molds in the corners and the shaded areas where they tend to accumulate most of the time. If the court is in door, it may require both vacuum cleaning and wet cleaning at least once a year. The wet cleaning ought to be done with equipment with soft bristles an gentle detergents.
Fungal organisms can easily grow on acrylic surfaces and they are always further encouraged by some substances that are thrown on the surface. To remove these organisms such as molds the following is an easy method that can be used. The surface can be cleaned with detergent and water in the ratio of two to one and gently brushed with a soft-bristled brush. The place should later be rinsed with a lot of fresh water.
Another way to ensure that the courts are maintained is to always make sure all the stagnant rain water is drained off. This is because this water leaves a lot of stains and debris. You should also make sure that the irrigation systems around the court are not sprayed on it.
Always make sure that foreign matter is removed from surface as often as possible. These may include things such as leaves or needles. These things may act as breeding grounds for molds and may lead to formation of debris too. When cleaning, the owner must always make sure that they use quality materials to clean such as hair type brooms and soft cloths.
When playing on the surface, it is advisable that they use the non-marking shoes and also no bikes or rollers ought to be allowed in unless the surface is made of the skate master surfacing system. People should not be allowed to throw chewing gums, foods and drinks inside the court. Chairs and benches must be lifted and not dragged on surface when being moved from one place to another. The chairs should also be manufactured with underground pads to avoid damaging the surface.
Tennis facilities should be manufactured with adequate drainage facilities. Excess water should not be allowed to flow back into the system because this can cause problems. Proper drainage systems should be installed and they should also be checked out on a regular basis.
Always make sure the place is renovated regularly. You should always check out for any damages so that the facility is in good condition all the time. The ground ought to be resurfaced from time to time because there can be signs of cracking and low spots. This can come as a result of improper construction. The resurfacing should be handled by a sport professional for good results.
One of the easiest ways to maintain your facility is making sure you clean it on a regular basis. You should also look at any signs of mildew or molds in the corners and the shaded areas where they tend to accumulate most of the time. If the court is in door, it may require both vacuum cleaning and wet cleaning at least once a year. The wet cleaning ought to be done with equipment with soft bristles an gentle detergents.
Fungal organisms can easily grow on acrylic surfaces and they are always further encouraged by some substances that are thrown on the surface. To remove these organisms such as molds the following is an easy method that can be used. The surface can be cleaned with detergent and water in the ratio of two to one and gently brushed with a soft-bristled brush. The place should later be rinsed with a lot of fresh water.
Another way to ensure that the courts are maintained is to always make sure all the stagnant rain water is drained off. This is because this water leaves a lot of stains and debris. You should also make sure that the irrigation systems around the court are not sprayed on it.
Always make sure that foreign matter is removed from surface as often as possible. These may include things such as leaves or needles. These things may act as breeding grounds for molds and may lead to formation of debris too. When cleaning, the owner must always make sure that they use quality materials to clean such as hair type brooms and soft cloths.
When playing on the surface, it is advisable that they use the non-marking shoes and also no bikes or rollers ought to be allowed in unless the surface is made of the skate master surfacing system. People should not be allowed to throw chewing gums, foods and drinks inside the court. Chairs and benches must be lifted and not dragged on surface when being moved from one place to another. The chairs should also be manufactured with underground pads to avoid damaging the surface.
Tennis facilities should be manufactured with adequate drainage facilities. Excess water should not be allowed to flow back into the system because this can cause problems. Proper drainage systems should be installed and they should also be checked out on a regular basis.
Always make sure the place is renovated regularly. You should always check out for any damages so that the facility is in good condition all the time. The ground ought to be resurfaced from time to time because there can be signs of cracking and low spots. This can come as a result of improper construction. The resurfacing should be handled by a sport professional for good results.
No comments:
Post a Comment